Search Engine Ranking 1

Manufacturers and die & mold shops can annihilate chatter problems in numerous milling operations with Iscar's cutting edge Chatterfree carbide endmill. The cutters' variable-pitch flute pattern abolishes harmonic vibration, the primary source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling. In addition, users also report longer edge life due to reduced chatter. The chatter-free feature is available in both solid carbide endmills and tips in Iscar's MULTI-MASTER replaceable-tip family. Diameter range is 6 to 20mm for the solid carbide endmills, and 8 to 20mm for MULTI-MASTER tips. These completely new endmills are perfect for lower power machines with ISO40 or BT40 adaptations. The solid carbide construction can handle full slot machining up to 2xD. Depth capability on the replaceable-tip version is more bounded since the active length is shorter. In full slotting applications on alloy steel, the solid carbide version effectively handles 0.03-0.05 feed rates at 180-220mm/min surface speed and 2xD depth of cut.

FINISHRED - Revolutionary Solid Carbide Endmills

Iscar is announcing the EFR.. B44 and the MM EFS.. Finishred a innovative solid carbide endmill family. The Finishred carbide endmill is a incorporation of both roughing and finishing endmills in a single tool. Roughing endmills remove material from work pieces more quickly and efficiently than conventional endmills. However, roughing endmills leave grooves on the machined surface. Consequently, after using a roughing endmill, a finishing endmill has to be used in order to obtain a even surface finish. This means time-consuming tool change, setup time and essentialness of maintaining 2 endmill types in the stock.

Features of the Finishred Endmills:

The EFR.. B44 and the MM EFS.. endmills feature four flutes with 45 degree helix, two serrated flutes and two continuous flutes.

The cutting edges of the finishing flutes are radially further from the tool axis than the cutting edges of the serrated flutes. The finishing flutes remove the grooves caused by the roughing flutes, leaving a smooth surface finish.

The tool is fully competent and enables running at rough machining parameters, resulting in finish surface quality.

The extraordinary tool design diminishes vibration at high load applications.

The tool generates short and long chips simultaneously. This chip mixture is evacuated more effectively than each individual chip type, an fantastic solution in slotting and cavity milling applications.

The Finishred is also available with the Multi-Master indexable milling head option which combines the Finishred incorporates with the advantage of little setup time, no regrinding costs and the large range of shank and extension options are available for the Multi-Master milling heads.

A single tool substitutes the roughing and finishing endmills; therefore lowering stock.

Tool change and setup time can be eliminated.

An extra tool position is gained on the machine

New Chip Splitting Solid Carbide Endmills for High Metal Removal Rates

ISCAR is introducing the ECP-3/4L family of chip splitting endmills. The completely new endmills are obtainable with 3 and four 38 degree flutes in grade IC900. They feature 2xD and long shanks with scaled down neck diameter, which enable machining along high shoulders, at high feeds. These endmills, due to their chip splitting ability and force distribution can be used very comfortably on low power machines (CAT40/BT40/ISO40). The serrated cutting edge features flat peaks which leave a better surface finish, in contrast to the current rougher carbide endmill. The ECP endmills are endorsed for machining austenitic and martensitic stainless steel, at up to 2xD depth of cut. They can be used on alloyed steel as well. All of the preceding tests conducted at numerous customers' locations showed exceptional results.

Some Of The Countless Advancements In Carbide Inserts From Iscar
Iscar is introducing a new unique milling system with tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has significant advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, reduced cutting forces resulting in higher performance.

Push Pull Testing For Railway Industry With Calibrated Measuring Instruments. Mechanical Load Testing Procedures For On Site Proof To Testing Demands.
Push Pull Testing for the Railway industry for proof of reliable anchor fixings. Calibrated push pull force gauges are used for stress load testing along with tensile strength pull testing procedures. Proof of load testing undertaken, measured, recorded in a reliable and standard way to BS5080 Part 1 standards.

Many Developments Have Multiplied Iscar's Families Of Indexable Endmills For Expanded Productivity
Helido-Upfeed 04 Two years ago Iscar introduced the extremely efficient H600 indexable endmill line, based on conceptually new Helido-Upfeed double sided inserts with 6 cutting edges. The first insert launched was the H600 WXCU 0806..., which was designed for milling cutters in the diameter range of 50 to 125 mm.

Iscar Recently Releases A Variety Of Original Lines To Enlarge Their Family Of Milling Tools
Iscar recently released a new family of High Speed Milling adjustable endmills and facemills that will improve milling of aluminum, non-metallics, cast iron and hardened steel. This should prove especially useful in the automotive and aerospace industries.

Iscar Adds Their Most Recent Creations To A Long Line Of Prosperous Hole Generating Solutions
Iscar recently released several different drilling innovations to meet their customers needs. These new products are Sumocham Drill, DR-DH and Deep Drills. Drawing off of their experience Iscar has come up with new and innovative ways to increase productivity for the end user.

Industrial Water Heater - Considering All Of Your Requirements - Read Thoroughly To Learn More
Looking into a commercial water heater? Then you have a few things that you must consider. Take a look at these areas to avoid making a mistake with the wrong unit.

Completely New Car Manufacturing Jobs In Order To Save The Overall Economy
The global recession the economy is experiencing in the past few years have pushed major companies to close down and stop their operations.

Automotive Manufacturing Jobs - What To Look For And Why.
There is no point in denying that workers serving in the automotive industry are also suffering from the economic recession that everybody is experiencing world wide.