Search Engine Ranking 1

Iscar is releasing Penta 34 carbide inserts utilizing a unique PB chipformer. The PB chipformer incorporates a single cavity by having a positive rake, neutral shoulder angle, and a honed edge. It is actually a C-type chipformer by having a varying frontal edge.

The revolutionary chipformer was devised for machining soft materials. It is an terrific solution for parting bearing steel and other highly ductile materials. It can be used at low feed: 0.03 to 0.10 mm/rev.

The combination of the revolutionary chipformer and IC908 grade provides incredible chip breaking and tool life results. The Penta 34-PB is available in a 1.5 to 3.0 mm width range, made from the ingenuous IC908 PVD coated grade. The completely new family broadens the application range of Iscar's utmost efficient grooving and parting PENTA 34 carbide inserts. The Penta 34-PB, when compared to a competitor's cutter, is a leading solution for machining several soft and ductile material.

Iscar's Upgrades for Parting

Iscar has developed a unique family of reinforced Tang-Grip blades for the prominent TRAUB (TNL and TNK models) and INDEX (MS18C model) turn/mill machines. These blades, due to their reinforced composition, can be employed in long overhang. Only the part of the blade imperative for penetration (cutting depth) has a reduced width. The remainder is thick, which provides improved rigidity and stiffness. These blades are an superior solution for parting and grooving in between the main and sub-spindle of turn/mill machines. The single-ended insert has a exceptionally rigid clamping and therefore provides a extremely valuable advantage over any other system.

Further additions to Iscar's Grip family are Do-Grip carbide inserts fashioned from the completely new Sumo Tec carbide grades: IC807 IC808 and IC830. The unique Sumo Tec grades unquestionably extend insert life, due to the greatest advanced coating technology followed by a particular surface treatment. This also provides reformed tool life due to decreased surface stress and an uniformly coated top surface. The level surface contributes to continuous uninterrupted chip flow, less produced heat and less friction. The new process promotes toughness and chipping resistance and thus decreases friction and built-up edge. This in turn extends and prolongs tool life at expanded machining conditions for all types of work piece materials. The new PVD process is made of Iscar's AL-TEC coating technology, using the unique surface treatment.

Iscar's Chip Splitting Inserts
Iscar's completely new HM90 APCR 220605-CS grooved carbide inserts put an end to chip crowding obstacles in rough milling of aluminum, where chips can pile up. They are a part of Iscar's growing Helialu HM90 line of inserts styled particularly for aluminum milling. With two grooves pressed into every polished cutting face, the inserts split aluminum chips into a amendable size for easy, dependable evacuation despite the application's characteristic large chip volume. The 22 mm inserts, each with 2 edges, are designed to expand metal removal over the extensive range of aluminum roughing conditions, from high power/low speed to high power/high speed. They work particularly well with Iscar's cutting edge HM90 EAL/FAL...22 aluminum rough milling cutters. Besides reliably clearing chips, the inserts conserve power and cut down chatter in long-overhang setups. The inserts feature a cavity on the bottom to make sure correct mounting in cutter chip pockets outfitted with normal spring pins. For best chip control, Iscar endorses using the HM90 APCR chip-splitting insert only in cutters with an even number of flutes.

Iscar Recently Releases A Variety Of Original Lines To Enlarge Their Family Of Milling Tools
Iscar recently released a new family of High Speed Milling adjustable endmills and facemills that will improve milling of aluminum, non-metallics, cast iron and hardened steel. This should prove especially useful in the automotive and aerospace industries.

Many Developments Have Multiplied Iscar's Families Of Indexable Endmills For Expanded Productivity
Helido-Upfeed 04 Two years ago Iscar introduced the extremely efficient H600 indexable endmill line, based on conceptually new Helido-Upfeed double sided inserts with 6 cutting edges. The first insert launched was the H600 WXCU 0806..., which was designed for milling cutters in the diameter range of 50 to 125 mm.

Brand New End Mills Coming From Iscar Can Expand Productivity While Reducing Costs
Manufacturers and die & mold shops can banish chatter problems in numerous milling operations with Iscar's new Chatterfree end mills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the primary source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.

Some Of The Countless Advancements In Carbide Inserts From Iscar
Iscar is introducing a new unique milling system with tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has significant advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, reduced cutting forces resulting in higher performance.

Industrial Water Heater - Considering All Of Your Requirements - Read Thoroughly To Learn More
Looking into a commercial water heater? Then you have a few things that you must consider. Take a look at these areas to avoid making a mistake with the wrong unit.

Brand New Land Rover Manufacturing Jobs
Britain's economy is trying to recover from the impact caused by the global economic recession through new Land Rover manufacturing jobs.

Automotive Manufacturing Jobs - What To Look For And Why.
There is no point in denying that workers serving in the automotive industry are also suffering from the economic recession that everybody is experiencing world wide.