Search Engine Ranking 1

Producers and die & mold shops can eradicate chatter problems in several milling operations with Iscar's revolutionary Chatterfree carbide end mills. The cutters' variable-pitch flute pattern eradicates harmonic vibration, the chief source of chatter. This allows faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling. In addition, users also report prolonged edge life due to lessened chatter. The chatter-free feature is realizable in both solid carbide endmills and tips in Iscar's Multi-Master replaceable-tip family. Diameter range is 6 to 20mm for the solid carbide endmills, and 8 to 20mm for Multi-Master tips. These completely new endmills are perfect for lower power machines with ISO40 or BT40 adaptations. The solid carbide version can handle full slot machining up to 2xD. Depth capability on the replaceable-tip version is more constrained since the active length is shorter. In full slotting applications on alloy steel, the solid carbide foundation readily handles 0.03-0.05 feed rates at 180-220mm/min surface speed and 2xD depth of cut.

Finishred - Ground Breaking Solid Carbide Endmills

Iscar is announcing the EFR.. B44 and the MM EFS.. Finishred a innovative solid carbide end mills family. The Finishred carbide endmill is a consolidation of both roughing and finishing endmills in a single tool. Roughing endmills remove metal from work pieces more quickly and proficiently than conventional endmills. However, roughing endmills leave grooves on the machined surface. In repercussion, after using a roughing endmill, a finishing endmill must to be used in order to achieve a even surface finish. This demands time-consuming tool change, setup time and inevitably of keeping two endmill types in the inventory.

Functions of the Finishred Endmills:

The EFR.. B44 and the MM EFS.. endmills feature 4 flutes with 45 degree helix, two serrated flutes and two continuous flutes.

The cutting edges of the finishing flutes are radially farther from the tool axis than the cutting edges of the serrated flutes. The finishing flutes phase out the grooves generated by the roughing flutes, leaving a constant surface finish.

The tool is fully functional and allows running at rough machining parameters, resulting in finish surface quality.

The distinguished tool design diminishes vibration at high load applications.

The tool creates short and long chips simultaneously. This chip mixture is evacuated more readily than each individual chip type, an extraordinary solution in slotting and cavity milling functions.

The Finishred is also presented with the Multi-Master indexable milling head alternative which merges the Finishred includes with the usefulness of little setup time, no regrinding costs and the broad range of shank and extension choices are obtainable for the Multi-Master milling heads.

A single tool replaces the roughing and finishing endmills; therefore lowering stock.

Tool change and setup time can be waived.

An additional tool position is accomplished on the machine

New Chip Splitting Solid Carbide Endmills for Heightened Metal Removal Rates

ISCAR is introducing the ECP-3/4L family of chip splitting endmills. The radical endmills are presented with 3 and four 38 degree flutes in grade IC900. They have 2xD and long shanks with decreased neck diameter, which facilitate machining along high shoulders, at high feeds. These endmills, due to their chip splitting factor and force distribution can be used very efficiently on reduced power machines (CAT40/BT40/ISO40). The serrated cutting edge incorperates flat peaks which leave a improved surface finish, in association to the current rougher carbide endmills. The ECP endmills are advocated for machining austenitic and martensitic stainless steel, at up to 2xD depth of cut. They can be employed on alloyed steel as well. All of the preliminary tests conducted at numerous customers' locations showed remarkable results.

Push Pull Testing For Railway Industry With Calibrated Measuring Instruments. Mechanical Load Testing Procedures For On Site Proof To Testing Demands.
Push Pull Testing for the Railway industry for proof of reliable anchor fixings. Calibrated push pull force gauges are used for stress load testing along with tensile strength pull testing procedures. Proof of load testing undertaken, measured, recorded in a reliable and standard way to BS5080 Part 1 standards.

Original Tools And Carbide Insert Configurations From Iscar To Better Improve The Machining Process
Iscar is introducing Penta 34 carbide inserts with a new PB chipformer. The PB chipformer features a single cavity with a positive rake, neutral shoulder angle, and a honed edge. It is actually a C-type chipformer with a different frontal edge.

Iscar Recently Releases A Variety Of Original Lines To Enlarge Their Family Of Milling Tools
Iscar recently released a new family of High Speed Milling adjustable endmills and facemills that will improve milling of aluminum, non-metallics, cast iron and hardened steel. This should prove especially useful in the automotive and aerospace industries.

Some Of The Countless Advancements In Carbide Inserts From Iscar
Iscar is introducing a new unique milling system with tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has significant advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, reduced cutting forces resulting in higher performance.

Industrial Water Heater - Considering All Of Your Requirements - Read Thoroughly To Learn More
Looking into a commercial water heater? Then you have a few things that you must consider. Take a look at these areas to avoid making a mistake with the wrong unit.

Brand New Land Rover Manufacturing Jobs
Britain's economy is trying to recover from the impact caused by the global economic recession through new Land Rover manufacturing jobs.

Automotive Manufacturing Jobs - What To Look For And Why.
There is no point in denying that workers serving in the automotive industry are also suffering from the economic recession that everybody is experiencing world wide.

Clarification Of Auto Engineering Jobs.
Automotive engineers who have years of experience in the automotive industry have the ability and skills of overseeing new projects and product development.